• Fine Adhesive Powder: Excellent adhesive strength.
• Provides good stretchability on fabric with a glossy cured print.
• It comes packaged in three sizes, manufactured in China.
  • 1Kg      2.2 Pounds
  • 5 Kg     11 Pounds
  • 15 Kg   33 Pounds
• It is intended to be use as a transfer adhesive powder to be applied to DTF prints after printing.

This product is a fine TPU powder that may become airborne during handling, application, pouring, or cleanup. Avoid breathing airborne powder or dust. Handle carefully to minimize dust generation and use appropriate respiratory protection when adequate dust control cannot be maintained.

Heat curing or melting TPU powder produces fumes and vapors that may be hazardous if inhaled. Curing must always be performed in a well-ventilated area with adequate airflow. In addition, fumes and vapors generated during the curing process must be either properly exhausted to the outside or captured using an appropriate air filtration or air-scrubbing system designed for process fumes.

Do not operate DTF curing equipment in an enclosed or poorly ventilated area, even when an air filtration or scrubbing system is being used. Avoid breathing fumes or vapors generated during the curing process.

Do not intentionally breathe dust, smoke, fumes, or vapors generated by this product. Use appropriate personal protective equipment and follow all workplace safety requirements.

Important: Review the product Safety Data Sheet (SDS) before use and follow all recommended handling, ventilation, respiratory protection, and safety precautions.